nav emailalert searchbtn searchbox tablepage yinyongbenwen piczone journalimg journalInfo searchdiv qikanlogo popupnotification paper paperNew
2025, 10, v.51 9-12
厂拌热再生沥青混合料拌和和易性研究——RAP加热温度的影响
基金项目(Foundation): 国家重点研发计划—道面设施寿命增强与性能提升技术(2022YFB2601200); 江苏现代路桥有限公司科技项目—高速公路沥青路面固废精细化处理与资源化高效利用成套技术研究(2022JKY18)
邮箱(Email):
DOI:
摘要:

为准确评价厂拌热再生沥青混合料拌和和易性,通过自研沥青混合料拌和和易性测试装置及提出的评价指标研究了RAP加热温度对厂拌热再生沥青混合料拌和和易性的影响规律。结果表明,使用提出的沥青混合料拌和和易性评价指标:最低拌和能耗,可准确反映厂拌热再生沥青混合料拌和和易性的变化规律。其中,RAP加热温度对再生沥青混合料拌和和易性影响显著,RAP加热温度越高,再生沥青混合料拌和和易性越好,但随着RAP加热温度超过130℃后,混合料拌和和易性提升的幅度明显变小。

Abstract:

In order to accurately evaluate the mixing workability of hot in-plant recycled asphalt mixture, a self-developed testing device of asphalt mixture mixing workability and proposed evaluation indicator were used to study the influence law of RAP heating temperature on the mixing workability of hot in-plant recycled asphalt mixture.The results show that the lowest mixing energy consumption index proposed in this study can accurately reflect the change law of the mixing workability of hot in-plant recycled asphalt mixture.Among them, the heating temperature of RAP has a significant impact on the mixing and workability of thot in-plant recycled asphalt mixture.The higher the heating temperature of RAP,the better the mixing workability of hot in-plant recycled asphalt mixture.However, the increase in mixing workability of the mixture with the heating temperature of RAP exceeding 130°C is significantly smaller.

参考文献

[1] 李宁.路面典型预养护措施的研究与应用概况综述[J].公路,2021,66(6):367-370.

[2] 汪小东.厂拌热再生沥青路面应用研究[J].公路,2018,63(12):274-277.

[3] 李庆瑞,王莎.厂拌热再生混合料的关键施工技术研究[J].筑路机械与施工机械化,2016,33(3):72-75.

[4] 高琦.厂拌热再生沥青混凝土施工技术研究[J].四川建材,2019,45(12):98-99.

[5] 徐金枝,郝培文,郭晓刚,等.厂拌热再生沥青混合料组成设计方法综述[J].中国公路学报,2021,34(10):72-88.

[6] Mongkol K,Chaturabong P,Suwannaplai A.Effect of bagasse and coconut peat fillers on asphalt mixture workability[J].Coatings,2020,10(12):1262.

[7] 张琛,汪海年,尤占平,等.橡胶沥青混合料和易性与压实特性的相关性[J].东南大学学报(自然科学版),2016,46(1):202-208.

[8] 延西利,景宏君,游庆龙,等.沥青混合料的拌和流动特性及和易性指数[J].土木工程学报,2019,52(10):120-128.

[9] 刘聂玚子,荣鑫,刘洪海,等.沥青混合料的搅拌功率试验和黏度模型[J].吉林大学学报(工学版),2023,53(1):220-225.

[10] 汪德才,郝培文,刘娜,等.乳化沥青冷再生混合料和易性指标及影响因素[J].北京工业大学学报,2016,42(6):919-925.

[11] CHEN B,DONG F Q,YU X,et al.Research on evaluation method of asphalt mixture workability based on minimum mixing energy consumption[J].Construction and Building Materials,2023,389:131760.

[12] 董夫强,祖元哲,朱启洋,等.热拌沥青混合料拌和和易性的评价方法[J].建筑材料学报,2024,27(3):275-282.

基本信息:

DOI:

中图分类号:U414

引用信息:

[1]孟令国,刘志国,谢韦韦,等.厂拌热再生沥青混合料拌和和易性研究——RAP加热温度的影响[J].四川建材,2025,51(10):9-12.

基金信息:

国家重点研发计划—道面设施寿命增强与性能提升技术(2022YFB2601200); 江苏现代路桥有限公司科技项目—高速公路沥青路面固废精细化处理与资源化高效利用成套技术研究(2022JKY18)

检 索 高级检索

引用

GB/T 7714-2015 格式引文
MLA格式引文
APA格式引文